Story continues below this advertisement
Titan Speed Engineering is now making their Sportsman Oil Pumps with a machined Billet Housing (7055-T7 Aircraft Grade Aluminum) and 356-T6 Aircraft grade casting cap. The wet sump GM pumps are available in a Drag and Oval track style pump. Both the drag and oval track pumps are available with "Little Dipper" extensions to reach deeper pan depths up to 10 inches. Even the lowest-buck racer has an alternative to cavitating stock-type pumps and their failure-prone external pickups. The Professional and Sportsman wet-sump models share proven gerotor pumping system. Titan's high-volume, anticavitation design is super smooth to 12,000-plus rpm!
The Sportsman series pumps come in two sizes, 875 series as well as 1100 series. The GM Sportsman series Drag pump is available in 6 different cap depths, and can run up to 3 of our "Little Dipper" extensions. The Oval Track pump is available with 4 different cap depths and can also run the "Little Dipper" option. The Titan "Little Dipper" option is available for $50 per extension.
All Titan models utilize a unique, adjustable pressure relief that allows you to select virtually any pressure setting from 30 psi to more than 300 psi. Four different pressure spring rates are available. Technicians individually bench-test all pumps for volume and pressure. Titan presets the pressure of your pump to suit your specific application. Titan wet sump pumps bolt right into the stock oil-pump locations of popular GM applications. All pumps are packaged complete with Grade-Eight mounting hardware. GM models include a large, integral pickup assembly that cannot crack or fall off. Correct-length driveshafts are provided. Titan's tool-steel shafts combine a super-strong, 5/16-inch-hex lower drive with a stock-style upper drive. Also available is our Hex-Hex Pro Drive option, This is a hex drive and replacement distributor gear with a hex broached into it. The gears are made of Premium Alloy Armco 18.
All Titan products are made in the USA of premium materials with solar power. For more information call Titan at 805-525-8660.
Lockstraps are well constructed. They will not pop off like typical straps with “S” hooks. An eight-bound steel cable is sandwiched between double nylon webbing. Tough rivets keep dual combination carabiner locks in place at both ends of the Lockstrap. The owner may change the combination with each use if so desired. Lockstraps also incorporated a soft tie-extension so no scratching occurs. A lot of thought and effort was put into creating the best most affordable tie-down strap on the market. The Lockstraps locking tie downs provide piece of mind, security, and unmatchable quality.
Lockstraps are 8.5 feet long, 1.5 inches wide, 1/4 inch thick, and weigh 2 pounds each. They come backed with a 100% satisfaction guarantee and a one-year parts and labor warranty. Now you can secure motorcycles, ATVs, tools, equipment, bicycles, etc. in less than a minute. Each strap is sold individually with a retail price of $39.95. Lockstraps can be found throughout an extensive dealer network throughout the states and online at www.lockstraps.com ,
ATI Performance Products, Inc. is proud to introduce the ATI modified Tilton Super Starter (ATI P/N 915536) for use with the Mopar Drag Pak Challenger and a 904 transmission. This starter has a billet nose adapter custom machined by ATI and adapted to the Tilton Super Starter.
The high torque starter is made to work with the 904 transmissions that are commonly used in the Drag Pak Challenger. The Super Starter is manufactured with a 3hp motor and is capable of handling 12v or 16v power systems. The ATI machined adapter allows for proper clearance to your ring gear and positions the starter to clear the manual steering shaft. The Tilton Super Starter with ATI machined adapter comes with all necessary hardware for installation.
For more information visit http://www.atiracing.com, or give them a call at (800) 284-3433.