« PREV. PAGE NEXT PAGE »

ATI Introduces the Superglide 4 Transmission!

After three successful seasons of testing and thousands of runs on Superglide 3 transmissions leased to ATI customers around the world, ATI is proud to introduce the Superglide 4 transmission.  Because of the generous and low-cost 5-year warranty program with the SG3, not only have ATI customers enjoyed service at no additional cost to them for breakage or updates, but ATI has been able to monitor performance on the SG3 used by various racers at various tracks under various driving conditions.
 
The SG4 is the result of this vigorous three-year testing program.  The SG4 is available for purchase and is being offered with the same low-cost five-year warranty program which requires an annual overhaul.  Included in the SG4 package is a perfectly matched converter.  Don't miss the special introductory price!
 
The Superglide line of transmissions developed by ATI have gained the reputation of being the most consistent and durable Powerglide transmissions on the market with the capability of handling 3,000 HP while increasing reliability with parts custom designed by ATI for endurance and performance.

For more information go to www.atiracing.com, or give them a call at (800) 284-3433.

New dual valve-spring kit for higher revving LS engines from Lunati

Not even the jolt of recession has arrested the progress of Lunati. Nonetheless recessionary times are upon us, and for those wishing to coax a little more power from their GM LS engines, this new Lunati dual valve-spring kit might be just the ticket.

The dark golden appearance of the springs catches your eye and there is a sense of quality about every component and the kit is $50 less expensive than those of their leading rival!

For more information, just visit www.lunatipower.com.

New Titanium Shield for T4 Turbos

Designed to keep more heat in the turbine housing and reduce underhood radiant heat, the T4 shield is capable of handling direct continuous heat up to 1800 degrees F (980°C) and up to 2500 degrees F (1370°C) of radiant heat.

Titanium T4 Turbo Shields are constructed the same as Design Engineering’s Titanium T3 shields.  Made from pulverized lava rock, extruded into fibers and then woven into a tight weave, this material offers titanium-like strength and durability. A high temperature rated silica insulation padding serves as added protection against extreme heat that turbochargers generate.

This improvement in underhood thermal management helps keep more heat inside the turbo to assist in faster spool-up while reducing radiant temperatures resulting in cooler air intake temperatures for improved performance and a boost in horsepower.  Less heat circulating in the engine bay also means reducing the chances of “heat soak” conditions on vital underhood components.

An added advantage of the T4 Turbo Shields ability to reduce underhood heat also means less heat entering the vehicles interior which can have a negative impact on the driver and occupants. Plus, DEI’s Titanium T4 Turbo Shield offers a very cool carbon fiber look!

Anchoring hooks have been incorporated and strategically located on the shield as a way for fastening it securely to the turbine housing. The T4 Turbo Shield is sold separately or as a kit that includes a 2 inch wide by 15 foot roll of Titanium down pipe wrap, two 14 inch stainless steel Locking Ties and 5 feet of fastening wire.  Everything is included for a quick and simple install.

For more information on Design Engineering’s new Titanium T4 Turbo Shield, Titanium Exhaust Wrap and other DEI thermal tuning products, visit:  www.DesignEngineering.com, call 1-800-264-9472 or email: sales@DesignEngineering.com.

« PREV. PAGE NEXT PAGE »