FAST EZ Clamp-On Tailpipe Wide-Band Sensor Mount Kit

Key to achieving the ultimate state of tune is having exact data. While FAST offers a supremely accurate wide-band air/fuel meter, the key to getting a precise reading is to ensure you tune with the correct information. The new FAST EZ Clamp-On Tailpipe Wide-Band Sensor Mount Kit attaches to your vehicle’s tailpipe so you can accurately measure exhaust wide-band readings to log in. The tailpipe kit is ideal for tuners and shops, allowing for wide-band sensor set-up to be completed within a few short minutes, as opposed to the length of time it takes to lift a car and cut/weld in an auxiliary wide-band sensor bung. No longer will you struggle or waste time drilling and welding on your headers or exhaust system for the sake of tuning.

The FAST EZ Clamp-On Tailpipe Wide-Band Sensor Mount Kit quickly mounts to a wide variety of tailpipe configurations using a mark-free rubber snubber bolt that clamps to the tailpipe. No welding or any modifications to the vehicle are required, making it perfect for the pro shop or home mechanic. Built from stainless steel, it will not scratch your tailpipe and will deliver years of solid service. Does not require any cutting, welding or removal of factory O2 sensors.

For more information about the FAST EZ Clamp-On Tailpipe Wide-Band Sensor Mount Kit, call them at 1-877-334-8355, or visit them online at www.fuelairspark.com.

Sealed Battery Box from Moroso

All the same features of the original Sealed Battery Box, at a more competitive price

1. • Ideal for relocating a battery to the rear of any race, street or show vehicle with or
   without a rear firewall.
2. • Holds a Series 24 battery with either top-post or side-post terminals; Outside
   Dimensions: 13-1/8" W, 11-1/8" D, 11-1/8" T.
3. • Fully accepted for racing by NHRA, IHRA and SCCA.
4. • Does not include battery cable; use with Moroso Battery Cable Kit No. 74055.

PART # DESCRIPTION
74051 Sealed Battery Box, Black

For more information, head to www.moroso.com.

Fastening Panels is Easy with Poly Performance Aluminum J-Hooks

Fastening panels to tubing and roll cages is easy with Poly Performance J-Hooks. Available for 1.5" OD and 1.75" OD tubing, J-Hooks are the perfect hardware to quickly and securely mount aluminum, steel and plastic panels to your roof, doors, floor and skid plates. Poly Performance J-Hooks eliminate the need to weld tabs or pre-fabricate mounting locations, simply drill a hole and fasten the hardware!

Manufactured of 1/2" 6061 aluminum, each J-Hook is machined for a precise fit and includes a 5/16-18 x 3/4" zinc plated button-head hex bolt.

J-Hooks are sold in a pack of 5 and MSRP for $25.00 and $30.00. Additional sizes will be available soon.

For more information about Poly Performance J-Hooks, visit www.polyperformance.com, or call 1-805-783-2060. Dealer inquiries welcome.