HIGH PERFORMANCE STREET CARBS FROM PROFORM PARTS

Proform Parts has released an expanded line of lightweight, yet inexpensive high-performance street carbs. Now you can have increased performance and striking good looks in one carburetor. Mechanical secondary, electric choke carbs are available from 600 to 850 cfm, and vacuum secondary with electric choke carbs from 600 to 750 cfm. These carbs are hand assembled in the USA and feature Proform’s high-flow aluminum main body, aluminum float bowls and a billet throttle plate.

Engineering features include changeable screw-in idle air bleeds, high-performance down-leg boosters (except 650 cfm), fuel level sight windows, externally adjustable needle and seat, dual feed inlet, easy access secondary idle air flow adjustment and corrosion resistant bright anodized appearance. Power valve blowout protection and non-stick gaskets are two more Proform benefits.

Additional horsepower is available by utilizing a Proform Carb Spacer Kit, and combined with Proform’s Carb Float Adjustment tool and Power Valve Removal Tool you’re ready for the street or strip. Preview all of Proform’s internal and external engine parts and handy tools at www.proformparts.com.

1450-CFM QFX Carburetor

The new proprietary QFX lightweight aluminum main body design features a reshaped venturi entrance for consistent and improved airflow, a lengthened venturi section for better throttle response, screw in air bleeds and CNC-Billet aluminum annular boosters. The air bleeds are shielded from the air entering the venturi to nearly eliminate air turbulence allowing for a smoother air stream and better fuel atomization through the carb.

The unique metering blocks are engineered with 5 emulsion channels with screw in restrictions to help optimize the air/fuel ratio in this enormous 1450-cfm carb. Changing these restrictions are as easy as changing jets and offer unsurpassed tuning ability throughout the RPM range. QFT assembles the QFX carbs using its aluminum fuel bowls with dual sight glass windows and inlets. The contoured fuel entrance and internal baffling helps reduce turbulence and fuel aeration.

Every QFX carb comes with non-stick gaskets and 2 additional links to change the opening ratio of the secondaires from soft progressive to medium progressive or 1:1.

For more information, visit QFT on the web at: www.quickfueltechnology.com, or e-mail quickfuel@earthlink.net.

ZEX 2010 Chevy Camaro V8 Nitrous System

The first nitrous system on the market specifically designed for the new 2010 Chevy Camaro V8, instantly delivering up to 175 additional horsepower. With the release of the 2010 Chevy Camaro, ZEX engineers have custom designed a nitrous system specifically tailored to the Gen V Camaro’s LS3 V8 engine, not only tuning the kit to add 75-175 additional horsepower but also mading the installation easy and ensured engine safety at the same time. This innovative nitrous system’s Active Fuel Control adjusts fuel delivery with changes in nitrous bottle pressure so that your engine never runs too rich or too lean while spraying. In addition, the system also offers an electronic TPS switch for reliable system activation at wide-open throttle; perfect for the Camaro’s throttle-by-wire system. These patented, innovative features make ZEX nitrous systems unlike any other kits on the market.

The easy-to-install ZEX system is available in both the classic purple or the new Blackout series with its black powder coated bottle and all necessary accessories for a simple, two hour installation. The ZEX 2010 Chevy Camaro V8 Nitrous Kit is simply the easiest way to add serious performance to this new vehicle, while at the same time ensuring engine safety. With all the extra torque and horsepower, it’s not uncommon to see over one second quicker e.t.s in the quarter mile.

For more information about the ZEX 2010 Chevy Camaro V8 Nitrous System or any other ZEX product, call ZEX at 1-888-817-1008, or visit them online at www.zex.com.