Story continues below this advertisement
These D-shaped fuel rails accommodate approximately 50 percent greater volume than comparable OEM and aftermarket counterparts. Wilson and his team of engineers started with an 11/16-inch inner diameter delivery tube and reshaped it to a D-form. Then they cleverly developed radiused inlet ports to even the fuel distribution to the injectors. These radiused inlet ports reduce the harmful effects of siphoning—especially at injector ports placed at the beginning of the fuel paths. Wilson also carefully positioned the injectors below the radiused inlets. By increasing the capacity of the fuel rails, radiusing the inlet ports, and setting the injectors in their submerged locations, Wilson reduced the adverse effects of pulsations and siphoning, improved the fuel distribution, and picked-up engine power.
As yet, no part numbers have been assigned for specific models. Nonetheless, with specifications supplied, these new D-shaped rails can be produced for all applications.
For further information contact Wilson Manifolds at www.wilsonmanifolds.com
Looking for great all-around outdoor protection for your vehicle? Covercraft Industries uses Kimberly-Clark’s EVOLUTION fabric to create their custom patterned all weather covers for cars, trucks and SUV’s. Often imitated, but never equaled, EVOLUTION is a US-made material used by millions of vehicle owners around the world. Besides protecting your vehicle in all types of severe weather, EVOLUTION has earned the highest UPF rating, providing maximum protection against damaging UV rays.
Bi-component technology blends polyethylene for softness and polypropylene for strength, shielding against dust, bird droppings, tree sap, industrial pollutants and more. EVOLUTION is breathable to allow moisture and heat to easily escape from under the cover. An added bonus is the 4-layer fabric thickness can absorb minor impacts; further protecting against nicks, dings and paint scratches. Do your vehicle a favor, protect its interior and exterior with EVOLUTION. To preview all of Covercraft’s quality vehicle protection products visit www.covercraft.com.
For additional information contact Covercraft Industries, 100 Enterprise Boulevard, Pauls Valley, OK 73075, 800-426-8377, Fax: 405-238-9601.
Never has a 2500 or 2600 Airspring been manufactured to replace Coilsprings for the Automotive Industry. Up to now
they were only designed for Industrial machine tools and a stiff ride for towing packages. Initially Airsprings were designed
for pressures up to 100psi, with little regard to ride characteristics. Chassis Tech has unveiled a New Generation
of Airsprings that have a bursting pressure up to 680psi, and still have a smooth ride. This is possible with new
engineering of cord material, cord angles, crimping, butyl rubber , and polymer compounds. Four CHASSIS TECH
DeNOMINATOR Air Springs will hold the weight of a 8,000lb TO 10,000lb vehicle.
1. LIFETIME WARRANTY;
2. LIMITED 1/2 PRICE OFFER ON ALL DeNOMINATOR AIR SPRINGS EXPIRES JANUARY 31ST 2009.
3. TRADE IN OFFER
4. DeNOMINATOR-I AIRSPRINGS AVAILABLE IMMEDIATELY.
5. 1/2” PORT AIR SPRINGS
Standard an no additional charge for all DeNOMINATOR-I and DeNOMINATOR-II Air Springs as of December 1st, 2008
Call AIRBAGIT.COM at 877-480-3798, or visit their website at: www.airbagit.com.