A New Glove is Born: The Ringers Authentic Plus
The palm is the same synthetic leather of the Authentic and the back is the same flexible spandex, with just enough protection in the areas you need, as the Handler Plus. They strategically placed the durable Zeus Clarino leather reinforcements in the most high wear-areas, the thumb, fore and middle fingers, to create a long-lasting, strong glove you've learned to expect from Ringers Gloves. The convenient Velcro wrist closure allows for quick and easy on and off.
The Authentic Plus is a great glove for mechanics, assembly line workers, construction workers and many other professions! The glove is available in black only, sizes Small through XX-Large and retails for $27.99.
To get this remarkable glove, go to www.ringersgloves.com.
COMP Cams XFI VSR Ford 4.6L/5.4L Modular 3 Valve Camshafts
The new COMP Cams XFI VSR Ford 4.6L/5.4L Modular 3V (Valve Springs Required) Camshafts deliver a great power improvement over stock levels. These cams are the next step up from the COMP Cams NSR (No Springs Required) Cams and represent a major upgrade in power production. When compared to the NSR, stock valve spring compatible cam series, the VSR cams offer a substantial power gain in the higher rpm ranges. To achieve this, a high-lift design that requires a COMP Cams Beehive Valve Spring upgrade was created to maximize power within the limits of the OEM unmodified cam phasers. These new VSR camshafts are available for both naturally aspirated and supercharged engines, with two levels available in each series; one designed for maximizing mid-range power and torque, while the other maximizes top end horsepower.
The performance secret behind the COMP Cams VSR Ford 3V Camshafts is in the extensive dyno testing that allowed us to determine precise cam timing events. Combining these optimized timing events with a high-lift lobe design offers substantial improvements in both power and throttle response. Designed to work flawlessly with the factory VCT, which is programmed to retard the cam timing above 4500 rpm, the new COMP Cams XFI VSR Ford 4.6L/5.4L Modular 3V Cams optimize both mid and high rpm performance.
For more information about the COMP Cams XFI VSR Ford 4.6L/5.4L Modular 3V Camshafts or any other COMP Cams products, go to www.compcams.com.
TCI Transmission Pressure Gauges
Automatic transmissions are sophisticated pieces of equipment, and knowing the exact line pressure of your racing or street transmission is critical to ensuring proper performance and long life. The TCI Transmission Temperature Gauges are complete gauge-to-sender kits that allow you to safely and effectively monitor the internal pressure of the transmission.
The new pressure gauges are available with either silver or black faces and come with both red and green light covers so that you can have clear, red or green backlighting. These gauges feature a 0 to 300psi range and are 2 5/8-inch diameter in size to fit in or under nearly any dashboard application. Best of all, these kits feature easy-to-install sensor adapters and work with any automatic transmission.
For more information about the TCI Transmission Pressure Gauges or any other TCI product, visit them online at www.tciauto.com.
Professional Products Ford 4.6L 3-Valve Performance Damper
If you are modifying your 2005 or later 4.6L 3V Ford engine, Professional Products has the damper you need! The PowerForce damper is an excellent performance street damper. It is 30% stronger than stock and will provide your late model performance engine the protection it needs during high RPM runs!
Professional Products engineers designed and built the Ford 3V damper to factory dimensions from nodular iron and the damper can use the stock serpentine belt. The PowerForce damper comes standard with an engraved timing mark at TDC (top dead center) so it can easily be seen in a crowded engine compartment.
For more information on its complete line of performance dampers, or to download the 2008 Professional Products performance parts catalog, visit www.professional-products.com.