SoffSeal's new 1968 Camaro convertible kit!
KIT309D provides all necessary parts for superior sealing of the 1968 Camaro fitted with a standard interior. Parts included in this kit are the door and trunk seals, rubber door u-jambs, convertible top kit, pillar post seals, quarter window seals, original style window felts, hood to cowl seal, splash flap set, bumper kit, paint gasket set, taillight lens gasket set and park light lens gasket set. Let SoffSeal’s attention to detail give your Camaro the professional finish and protection it deserves.
For additional information, a catalog, or the name of your local SoffSeal dealer, please call toll free, 1-800-426-0902
Bowler Transmission offers two NEW PRODuCts
Bowler Transmissions is now offering two new products, the first, Tru-Shift Throttle Correction System, for Holley, Edelbrock and Demon Carburetors, offers the following:
- Shifts perfectly every time.
- Provides proper shifting in city traffic or when wide open.
- Engineered to provide proper geometry through all throttle ranges.
- Easy to install – simply bolts on.
- Automatically adjusts cable with wide open throttle.
- No need to worry about adjustments for throttle cable pressure.
- Durable and attractive finish – bracket is stainless and the arm is anodized.
- Provides precise cable adjustment for 700-R4 and 200-4R transmissions.
- Starting at $249.00
- The second, a Lock-Up Control Module for 700-R4 and 200-4R transmissions features
- Converter locks-up with adequate RPM gain after 4th gear and unlocks automatically!
- Lower cruising RPM, better fuel efficiency, helps reduce heat!
- Easy one wire hook up, does not require a vacuum switch.
- Starting at $179.00
For more information, go to bowlertransmissions.com
New JESEL Shaft Rockers For Dart Big Chief Cylinder Heads
Jesel has just released another upgrade for the Dart Big Chief – a one-piece billet stand that securely anchors the shaft rocker system to the head. A simple machine shop milling operation is required to bring all rocker pads down to the same level, but any competent machine shop can easily perform this operation. (Jesel will also do the machine work if you send your cylinder heads to them).
The rockers are CNC machined out of heat-resistant, 7000 Series aluminum, shotpeened for strength and fitted with precision Timken needle bearings that ride on centerless-ground, high-strength steel shafts. These rockers are rated for more than one-inch-lift cams and 1,200 pounds of open spring pressure. Several options are available including .360" or .250”-wide needle nose rollers, several lightening options such as the single-rib MoHawk style, and Jesel’s exclusive ball adjusters that reduce friction and make the rocker even stronger.
For more information please visit www.jesel.com.
Prepare and Protect Your Metal in One Step
Picklex 20 is a one-step, one-coat complete metal surface cleaner and prep. Spray or brush Picklex 20 onto steel, aluminum or galvanized steel and it removes and/or converts corrosion such as rust and aluminum oxide and leaves a protective ready-to-paint coating, all in one step. No other work is needed for paint and powder coat. It also keeps the metal surface rust free for a long period of time if stored indoors. Cold rolled steel showed a 43% increase in weld strength and welding on mill scale showed an 8% increase as compared to welding on bare metal.
Orison Marketing's Picklex 20 is environmentally safe, non-toxic, non-flammable, non-hazardous and water-soluble. For additional information on Picklex 20 log on at www.orisonmarketing.com.
Classic Tube Straight-Length Stainless Steel Tubing With Fittings
Do it yourselfers, save time and aggravation when creating Brake Lines and Fuel Lines for your vehicle! Order Classic Tube Straight Lengths in high-quality 304 Stainless Steel by the inch, up 240-inches in length (72-inches and below are easily shipped by UPS). Specify the types of flares and the SAE and Metric fittings you require. All flares and fittings are done expertly by Classic Tube technicians to exacting standards. Then bend them to your satisfaction with a quality Classic Tube Bending Tool.
Classic Tube Straight-Lengths With Fittings are available in 3/16-inch, ¼-inch, 5/16-inch and 3/8–inch diameter tubing. Use for Brake Lines, Fuel Lines, Transmission Lines, Power Steering Lines, Vacuum Lines or any hydraulic hard lines. Great to have a quantity on hand in any Repair Shop, Restoration Shop, Maintenance Facility or Fabrication Shop to bend as you need them.
Straight length tubing without end forming is also available in lengths up to 20 feet. To preview all their products and services, visit www.classictube.com.