PRO-X Powerglide O-Ring Transmission Pan
The TCI Powerglide O-Ring Transmission Pan features an exclusive o-ring seal that makes it easy to achieve a leak-free seal every time, regardless of how flat or uneven the gasket mating surface may be. The durable, 1-piece o-ring can be reused several times, saving the time, hassle, and cost of replacing a gasket every time you need to pull the pan on your Powerglide.
The TCI Powerglide O-Ring Transmission Pan also features the proprietary metallic gray Heat Dissipating Technology coating, which has been proven to reduce transmission operating temperatures by a wide margin over competitor’s coatings. Additional features that help reduce operating temperature and extend transmission life are cooling fins and an additional 2 quarts of fluid capacity over the stock Powerglide pan. Constructed from extra rigid sand-cast aluminum, the TCI Powerglide O-Ring Transmission Pan will also add structural rigidity to your Powerglide case, further strengthening it against the severe load of a high-horsepower drag racing engine. Included with the transmission pan are a reusable o-ring seal, transmission filter and filter spacer, and stainless steel mounting hardware. For more information about the TCI Powerglide O-Ring Transmission Pan, visit them online at www.tciauto.com.
PipeMaster THE PROFESSIONAL TOOL FOR PROFESSIONAL WELDS
PipeMaster eliminates all of the guesswork in tube fitting and provides you with the exact shape for a perfect cut every time. PipeMaster tools are available in sizes from 1/2-inch tubing up to 12-inch diameter pipe, and will be the most accurate and easy to use hand tool in your welding toolbox.
PipeMaster tools slide over the tube and the pins adjust to the exact shape of the area to be cut. The tool is then slid back far enough to trace the pattern onto the tube, then cut and weld. PipeMaster eliminates re-cutting, grinding and waste of materials. Metric and SAE sizes are available. If you’re fabricating any type of tubing based structure, you need PipeMaster.
To find out more about this invaluable tool visit PipeMaster at www.pipemastertools.com.
STOPFLEX BRAIDED BRAKE HOSE FOR 1967-2002 CAMARO
The Camaro is arguably one of the best selling and most prolific cars ever produced by Chevrolet. CLASSIC TUBE, the industry leader in fluid transfer products, now has StopFlex D.O.T. Stainless Steel Braided Brake Hoses for the 1967 through 2002 Camaro. StopFlex hoses are corrosion resistant, feature factory style brackets for easy installation, and prevent volumetric expansion within the hose, providing a firmer pedal.
The StopFlex 5-layer design features 304 Stainless Steel braided wire, Teflon hose and Kevlar braid for durability and safety, resulting in the best and strongest brake hoses on the performance market. StopFlex hoses have been strenuously tested and approved for all street and racing applications.
All Classic Tube products are made in the US from US components, and are shipped worldwide. Check out the StopFlex application for your Camaro, and their full line of fuel, transmission, choke, vacuum and hydraulic pre-bent tubing at www.classictube.com.
ZEX GM LSX Nitrous System
Once again, ZEX is at the forefront of nitrous technology by developing an innovative wet nitrous system designed specifically for GM LSX powered vehicles. Every hose, wire and fitting has been engineered and manufactured for a plug and play, perfect installation.
In addition to perfect fit and ease of installation, the new ZEX GM LSX Nitrous System incorporates the most technically advanced performance features available, including the patented ZEX Active Fuel Control. This innovative performance and safety feature automatically adjusts the nitrous fuel enrichment so your engine never runs too rich or too lean. In addition, the ZEX nitrous system features a patented electronic TPS switch for perfect system activation at wide-open throttle. Power settings are fully adjustable from 75 to 175 horsepower with the included tuning jets. For more information about the ZEX GM LSX Nitrous System or any other ZEX product, call us at 1-888-817-1008, or visit us online at www.zex.com.
PROFORM’S ALL-NEW 1050 CFM RACE SERIES CARBURETOR
This all-new PROFORM 1050 features a 50cc diameter rear accelerator pump, billet-metering blocks that have changeable idle-feed restrictors and easy-to-change emulsion jets for easy tuning. The strong billet throttle base plate features adjustable secondary airflow cam brackets, power-valve blowout protection, button torx-head throttle plate screws and slip-link mechanical secondary linkages. Lightweight aluminum fuel bowls contain sight windows, and a non-stick base gasket is provided. Now you can have show and go with one carb. To preview this 1050 carburetor and the complete lineup of PROFORM carbs, engine tools and internal and external engine parts, visit www.proformparts.com.
Whaddaya Think? Click here to write a comment! Close this box